Good Brick and Stone Work Helps a Building Stay Strong for Many More Years
good masonry work helps a building last longer because it keeps walls strong, blocks out water, and spreads weight the right way. Poor work can lead to cracks, loose joints, leaks, and costly repairs. In places like Urbandale, IA, buildings face weather, moisture, and daily wear, so the skill behind the work matters just as much as the materials.
quick diagnosis summary
when a building starts to age too fast, weak masonry work is often part of the problem. A wall may look fine at first, but bad mortar joints, uneven brick placement, or poor drainage can slowly cause damage. A skilled masonry contractor helps prevent these issues by building and repairing surfaces the right way from the start. This applies to homes, stores, offices, and other structures in the broader service category.
common symptoms
there are several signs that masonry workmanship may be hurting a building’s life span. Some problems show up fast. Others take years to become clear. Small signs should not be ignored because they often grow into bigger repairs.
- cracks in brick, stone, or mortar
- gaps around windows or doors
- loose or leaning sections of wall
- water stains on interior walls
- crumbling mortar joints
- bricks that flake or chip apart
- uneven surfaces or settling areas
these signs often mean the wall is not handling water or weight the way it should. If left alone, the damage can spread into nearby parts of the building.
likely causes
poor craftsmanship can happen in many ways. Sometimes the wrong mortar mix is used. Sometimes bricks or stones are set too quickly without proper spacing. In other cases, the base under the wall is weak, so the structure shifts over time. A trained masonry contractor knows how each part works together.
water is one of the biggest causes of damage. If mortar joints are not packed well, water gets inside. If flashing or drainage details are missed, moisture stays trapped. In cold weather, that water can freeze and expand, which leads to cracking and surface breakdown. Even in milder weather, trapped moisture can slowly weaken the wall.
another common cause is poor repair work. For example, patching old mortar with a mix that is too hard can damage nearby brick. The repair may look clean at first, but the wall can start breaking around it. Good craftsmanship means matching materials and methods to the building, not just filling a gap.
what to check first
if you think masonry quality is affecting your building, start with a simple visual check. Walk around the property and look closely at the mortar lines, corners, and places where water may collect. Look after heavy rain if possible. That often makes trouble spots easier to see.
- check for cracks near doors, windows, and corners
- look for missing or soft mortar joints
- see if any bricks or stones are loose
- spot areas where water sits near the wall base
- look inside for damp spots or peeling paint
- watch for bulging or leaning wall sections
these first checks can help you spot the difference between surface wear and a deeper problem. If several signs show up at once, the issue may be more serious than it seems.
safe fixes vs pro-level fixes
some simple upkeep is safe for a property owner or manager. You can clear leaves from drain paths, keep sprinklers from soaking walls, and watch small cracks for changes. You can also take photos over time to track movement. These steps help catch problems early.
larger repairs should be handled by a masonry contractor. Repointing mortar, rebuilding damaged sections, fixing structural cracks, and correcting water entry all need the right tools and training. If the repair is done wrong, the wall may look better for a short time but fail again much sooner.
a pro also knows when damage is tied to the foundation, framing, or drainage around the building. That matters because a wall problem is not always just a wall problem. The visible crack may be the result of movement below or moisture behind the surface.
prevention tips
good craftsmanship is not just about building something that looks nice today. It is about helping the structure stay sound for years. The best way to protect a building is to pair quality workmanship with regular care.
- inspect masonry surfaces every year
- repair damaged mortar before water gets in
- keep gutters and downspouts working well
- slope soil away from the building
- use matching materials for repairs
- clean masonry gently and avoid harsh methods
- address small cracks before they spread
routine care lowers the chance of major damage. It also helps building owners plan repairs before they become urgent. A strong wall system lasts longer when it is built well and checked often.
final recommendation
if you see cracking, moisture, or mortar breakdown, it is smart to act early. Skilled workmanship protects the strength, safety, and value of a building over time. In Urbandale, IA, weather and age can speed up masonry wear. At Des Moines Masonry, we help property owners spot problems, plan smart repairs, and protect their buildings for the long run. Call us at (515) 355-3123 to schedule a visit or ask questions about your masonry needs.
